CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Request Information
Unit of Measure

Specifications

Design Unit

 N/A Metric

d - Bore

 N/A 150 mm

Cage Type

 N/A EMB

Cage Material

 N/A Brass

Superseded Part

 N/A 22330YMBW33C3

Dimensions

D - Outer Diameter

 N/A 320 mm12.5984 in

B' - Inner Ring Width

 N/A 108 mm4.252 in

B - Outer Ring Width

 N/A 108 mm4.2520 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 N/A 3 mm0.120 in
r - Outer Ring "To Clear" Radius2 N/A 3 mm0.12 in

da - Inner Ring Backing Diameter

 N/A 194 mm7.6000 in

Da - Outer Ring Backing Diameter

 N/A 288 mm11.3000 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 1890000 N424000 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 1620000 N365000 lbf

Factors

e - ISO Factor3 N/A 0.33
Y0 - ISO Factor4 N/A 2.03
Y1 - ISO Factor5 N/A 2.08
Y2 - ISO Factor6 N/A 3.09

Reference Thermal Speed Rating (Grease)

 N/A 1500 rpm
Reference Thermal Speed Rating (Oil)7 N/A 1600 rpm
Cg - Geometry Factor8 N/A 0.0884
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.