CAD (0) ▾
  • Cart is empty
  1. Request CAD files
The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.
Request Information
Unit of Measure

Specifications

Series

 N/A 843000

Cone Part Number

 N/A EE843220

Cup Part Number

 N/A 843291CD

Design Unit

 N/A Inch

Cage Material

 N/A Pin-Type

Related Assembly Number(s)

 N/A EE843220-902A2 EE843220-902A4 EE843220-902A5 EE843220-902A6 EE843220-902A7 EE843220-902A8 EE843220-902A9 EE843220-902B2 EE843220-902B8 EE843220-902C4

Dimensions

d - Bore

 N/A 22 in558.8 mm

D - Cup Outer Diameter

 N/A 29.0000 in736.600 mm

B - Cone Width

 N/A 3.4688 in88.108 mm

C - Double Cup Width

 N/A 5.4375 in138.113 mm

T - Bearing Width across Cones

 N/A 7.3751 in187.328 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.25 in6.4 mm
r - Cup Backface "To Clear" Radius2 N/A 0.06 in1.5 mm

db - Cone Backface Backing Diameter

 N/A 23.27 in591 mm

Da - Cup Frontface Backing Diameter

 N/A 27.96 in710.20 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.33 in8.4 mm
a - Effective Center Location3 N/A 0.89 in22.6 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)4 N/A 536000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 810000 lbf3600000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 210000 lbf934000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 70700 lbf315000 N

Factors

K - Factor8 N/A 1.7
e - ISO Factor9 N/A 0.72
Y1 - ISO Factor10 N/A 0.93 1.39
Y2 - ISO Factor11 N/A 1.39
Cg - Geometry Factor12 N/A 0.248
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.