CAD (0) ▾
  • Cart is empty
  1. Request CAD files
The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.
Request Information
Unit of Measure

Specifications

Series

 N/A H337800

Cone Part Number

 N/A H337846

Cup Part Number

 N/A H337816XD

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Note

 N/A This part has a non-standard shoulder design. Please email customer CAD for shoulder details to ensure the proper design of mating components.

Related Assembly Number(s)

 N/A H337846-90114 H337846-90150

Dimensions

d - Bore

 N/A 6.9995 in177.787 mm

D - Cup Outer Diameter

 N/A 11.8780 in301.701 mm

B - Cone Width

 N/A 3.4375 in87.313 mm

C - Double Cup Width

 N/A 7.7500 in196.850 mm

T - Bearing Width across Cones

 N/A 7.5017 in190.543 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.06 in1.5 mm
r - Cup Backface "To Clear" Radius2 N/A 0.04 in1.0 mm

db - Cone Backface Backing Diameter

 N/A 7.83 in199 mm

Da - Cup Frontface Backing Diameter

 N/A 11.28 in286.50 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.19 in4.8 mm
a - Effective Center Location3 N/A -0.7 in-17.8 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)4 N/A 58700 lbf261000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 394000 lbf1750000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 102000 lbf454000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 34800 lbf155000 N

Factors

K - Factor8 N/A 1.69
e - ISO Factor9 N/A 0.35
Y1 - ISO Factor10 N/A 1.95
Y2 - ISO Factor11 N/A 2.9
Cg - Geometry Factor12 N/A 0.127
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.