The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

 N/A Metric

d - Bore

 N/A 30 mm

Cage Type

 N/A EJ

Cage Material

 N/A Steel

Dimensions

D - Outer Diameter

 N/A 2.8346 in72 mm

B' - Inner Ring Width

 N/A 0.7480 in19 mm

B - Outer Ring Width

 N/A 0.748 in19 mm

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 N/A 0.040 in1 mm
r - Outer Ring "To Clear" Radius2 N/A 0.040 in1 mm

da - Inner Ring Backing Diameter

 N/A 41 mm1.600 in

Da - Outer Ring Backing Diameter

 N/A 64 mm2.500 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 15800 lbf70300 N

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 12700 lbf56500 N

Factors

e - ISO Factor3 N/A 0.26
Y0 - ISO Factor4 N/A 2.54
Y1 - ISO Factor5 N/A 2.6
Y2 - ISO Factor6 N/A 3.87
Cg - Geometry Factor7 N/A 0.0405
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Geometry constant for Lubrication Life Adjustment Factor a3l.