Part Number HJ-9612048, 6673M On The Timken Company

CAD (0) ▾

Clearance fit suggested for outer ring when housing is stationary relative to load.
Tight transition fit suggested if housing rotates relative to load.
Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (r_{as max}).
Meets Military Standard MS 51961.

Request Information

Unit of Measure

Bearing Dimensions | Specifications | Mounting Data | Sub Assembly Part Numbers

Bearing Dimensions

Shaft Diameter (F_w)	N/A 152.40 mm6.00 in
D - Outer Diameter	N/A 190.5 mm7.5 in
Dimension C/B	N/A 76.2 mm3.0000 in

Specifications

Static Load Rating C_o	N/A 984000 N221000 lbf
Dynamic Load Rating C₁¹	N/A 438000 N98400 lbf
Geometry Factor C_g²	N/A 0.1461
Thermal Speed Ratings - Oil	N/A 2200 rpm
Thermal Speed Ratings - Grease	N/A 2000 rpm

Mounting Data

Chamfer r_smin	N/A 3.050 mm0.12 in
Max. Mounting Dimensions Clearance Fit 1	N/A 152.40 mm6.00 in
Min. Mounting Dimensions Clearance Fit 1	N/A 152.375 mm5.9990 in
Max. Mounting Dimensions Clearance Fit 2	N/A 190.546 mm7.5018 in
Min. Mounting Dimensions Clearance Fit 2	N/A 190.500 mm7.500 in
Max. Mounting Dimensions Tight Transition Fit S	N/A 5.9984 mm152.359 in
Min. Mounting Dimensions Tight Transition Fit S	N/A 152.334 mm5.9974 in
Max. Mounting Dimensions Tight Transition Fit H	N/A 190.439 mm7.4976 in
Min. Mounting Dimensions Tight Transition Fit H	N/A 190.485 mm7.4994 in
Shoulder Diameter D_a	N/A 176.21 mm6.938 in

Sub Assembly Part Numbers

Used with Inner Ring Designation

N/A IR-809648

¹ Based on 1 x 10⁶ revolutions L₁₀ life, for the ISO life calculation method.
² C_g factor for bearing without inner ring.