CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Request Information
Unit of Measure

Specifications

Design Unit

 N/A Metric

d - Bore

 N/A 120 mm

Cage Type

 N/A EM

UPC Code

 N/A 087796138148

Cage Material

 N/A Brass

Superseded Part

 N/A 22324YMW33W800C3

Dimensions

D - Outer Diameter

 N/A 10.2359 in259.993 mm

B' - Inner Ring Width

 N/A 3.3858 in86 mm

B - Outer Ring Width

 N/A 3.3858 in86 mm

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 N/A 0.100 in2.5 mm
r - Outer Ring "To Clear" Radius2 N/A 0.1 in2.5 mm

da - Inner Ring Backing Diameter

 N/A 157.000 mm6.2000 in

Da - Outer Ring Backing Diameter

 N/A 234.000 mm9.200 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 272000 lbf1210000 N

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 244000 lbf1080000 N

Factors

e - ISO Factor3 N/A 0.32
Y0 - ISO Factor4 N/A 2.07
Y1 - ISO Factor5 N/A 2.11
Y2 - ISO Factor6 N/A 3.15

Reference Thermal Speed Rating (Grease)

 N/A 1900 rpm
Reference Thermal Speed Rating (Oil)7 N/A 2200 rpm
Cg - Geometry Factor8 N/A 0.0834
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.