CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Request Information
Unit of Measure

Specifications

UPC Code

 N/A 087796025448

Design Unit

 N/A Metric

d - Bore

 N/A 130 mm

Lubrication Type

 N/A Standard Grease

Cage Type

 N/A EJ

Cage Material

 N/A Steel

Superseded Part

 N/A 22226CJW33C3

Factors

e - ISO Factor1 N/A 0.26
Y0 - ISO Factor2 N/A 2.56
Y1 - ISO Factor3 N/A 2.62
Y2 - ISO Factor4 N/A 3.9

Reference Thermal Speed Rating (Grease)

 N/A 2400 rpm
Reference Thermal Speed Rating (Oil)5 N/A 2900 rpm
Cg - Geometry Factor6 N/A 0.0819

Dimensions

D - Outer Diameter

 N/A 230 mm9.0551 in

B' - Inner Ring Width

 N/A 64 mm2.5197 in

B - Outer Ring Width

 N/A 64 mm2.5197 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius7 N/A 2.5 mm0.100 in
r - Outer Ring "To Clear" Radius8 N/A 2.5 mm0.1 in

da - Inner Ring Backing Diameter

 N/A 155 mm6.1000 in

Da - Outer Ring Backing Diameter

 N/A 210 mm8.3000 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 945000 N212000 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 757000 N170000 lbf
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. See engineering
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 See thermal speed ratings in the engineering section.
  • 6 Geometry constant for Lubrication Life Adjustment Factor a3l.
  • 7 Maximum housing fillet radius that bearing corners will clear.
  • 8 These maximum fillet radii will be cleared by the bearing corners.