The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

 N/A Metric

d - Bore

 N/A 200 mm

Cage Type

 N/A EMB

UPC Code

 N/A 087796141599

Cage Material

 N/A Brass

Superseded Part

 N/A 23340YMBW33W45AW800C4

Dimensions

D - Outer Diameter

 N/A 16.5352 in419.993 mm

B' - Inner Ring Width

 N/A 6.4960 in165 mm

B - Outer Ring Width

 N/A 6.4960 in165 mm

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 N/A 0.160 in4 mm
r - Outer Ring "To Clear" Radius2 N/A 0.16 in4 mm

da - Inner Ring Backing Diameter

 N/A 246.000 mm9.700 in

Da - Outer Ring Backing Diameter

 N/A 366.000 mm14.4000 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 838000 lbf3730000 N

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 660000 lbf2940000 N

Factors

e - ISO Factor3 N/A 0.41
Y0 - ISO Factor4 N/A 1.62
Y1 - ISO Factor5 N/A 1.66
Y2 - ISO Factor6 N/A 2.47

Reference Thermal Speed Rating (Grease)

 N/A 670 rpm
Reference Thermal Speed Rating (Oil)7 N/A 720 rpm
Cg - Geometry Factor8 N/A 0.1043
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.