The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back

●   UCFL two-bolt flanged units are suggested for industrial applications where normal loads are encountered.
●   This series is primarily designed for applications where the mounting area is restricted.
●   Each unit comes assembled and ready for mounting, using bolts through the flange.
●   These units use wide inner ring ball bearings with self-aligning spherical outside diameters that compensate for shaft misalignment.
●   Timken UCFL series Mounted Bearings feature the Timken set screw locking (UC) bearing insert.
●   Bearing prelubricated and ready for immediate installation.
●   Grease fitting supplied for relubrication.
●   The bonded seal design is well-suited for applications involving wet or dirty environments.
●   Bolt-hole spacing dimensions and shaft center location are interchangeable with competitive units.
Unit of Measure

Specifications

Bore Size

 N/A 20 mm

Seal Type

 N/A IP69K Seal

Housing Material

 N/A Cast Stainless Steel

Bearing Number

 N/A SUC204-IP69K/F

Lubrication Type

 N/A Standard Food Safe Grease

Locking Style

 N/A Set Screw Locking

Housing Construction

 N/A Two-Bolt Flange

Bearing Style

 N/A Ball Bearing

Dimensions

Total Length H

 N/A 4.449 in113.0 mm

Total Height L

 N/A 2.362 in60.0 mm

Total Width A0

 N/A 1.311 in33.3 mm

Bolt Hole Spacing J

 N/A 3.543 in90.0 mm

Housing Width A

 N/A 1.024 in26.0 mm

Bolt Hole Size N

 N/A 0.472 in12.0 mm

Center of Bearing from Housing End A2

 N/A 0.591 in15.0 mm

Center of Bearing from Bearing End S

 N/A 0.500 in12.7 mm

Inner Ring Width B

 N/A 1.220 in31.0 mm

Basic Load Ratings

Dynamic Load Rating

 N/A 2451 lbf10900 N

Static Load Rating

 N/A 1203 lbf5350 N